At the conference PM 2012 Director of Materials Research Centre Oleksiy Gogotsi presented a report Abrasive wear of the steel against coke

Powder Metallurgy: today and tomorrow
Following issues: fundamental problems of the powders, the processes of powder materials formation...
Rus На русском Eng In English

27 - November 30, 2012 in Kiev ("KPI", Engineering Physics Department) was held international conference "Powder Metallurgy: today and tomorrow" is dedicated to the sixtieth of Frantsevich Institute for Problems of Materials Science of NASU, National Academy of Science, Ukraine

Conference PM 2012 "Powder Metallurgy: today and tomorrow"

PM 2012 conference focused on the following issues: fundamental problems of the powders, the processes of powder materials formation, the influence of the solid-and liquid-phase sintering of powder on the products properties, technology of powder products obtaining, and nanotechnologies in powder metallurgy, the high-pressure, abrasive materials, testing the powder materials properties.

At the conference Director of Materials Research Centre Oleksiy Gogotsi presented a report

Abrasive wear of the steel against coke. O.G.Gogotsi 1, N.P.Brodnikovskiy 2, Y.I. Zozylia1, V.V. Motronenko 1, P.V. Mazur 2, M.V. Gubinskiy 3, I.V. Barsukov 4, J. David Carter 5

11Materials Research Centre Ltd., 03680 Kiev, st. Krzhizhanovskogo, 3, Ukraine;
2 Frantsevich Institute for Problems of Materials Science of NASU, National Academy of Science, 03142, Kiev, st. Krzhizhanovskogo, 3, Ukraine;
3 National Metallurgic Academy of Ukraine (NMetAU), 49600, Dniepropetrovsk, str. Gagarina, 4, Ukraine;
4 American Energy Technologies Co., 60026, Glenview, IL, USA,
5 Argonne National Laboratory, 60439, Argonne, IL, USA,

A.V. Klimchuk, N.P. Brodnikovskiy, A.V.Ustyuzhanina, O.G.Gogotsi, I.V.Uvarova, M.V.Gubinskiy A.V.Ustyuzhanina, S.Lishevskiy, Y.I. Zozulia, O.G.Gogotsi, A.V.Klimchuk O.G.Gogotsi, A.V.Ustyuzhanina, S.Lishevskiy, Y.I. Zozulia,  N.P.Brodnikovskiy, A.V.Klimchuk, A.V.Pashinin
A.V. Klimchuk, N.P.Brodnikovskiy, A.V.Ustyuzhanina, O.G.Gogotsi, prof. I.V.Uvarova, prof. M.V.Gubinskiy
A.V.Ustyuzhanina, prof. S.Lishevskiy, Y.I. Zozulia, O.G.Gogotsi, A.V.Klimchuk
O.G.Gogotsi, A.V.Ustyuzhanina, prof. S.Lishevskiy, Y.I. Zozulia, N.P.Brodnikovskiy, A.V.Klimchuk, A.V.Pashinin
At the PM 2012 conference:  Director of Materials Research Centre Oleksiy G. Gogotsi presented a report «Abrasive Effect of  the Coke Particles Flow on the Steel» Director of Materials Research Centre Oleksiy G. Gogotsi At the PM 2012 Conference, NTUU KPI, Kiev, Ukraine Final speech at the conference PM 2012, Dr. Leonid Chernyshev, Frantsevich Institute for Problems of Material Science
At the PM 2012 conference:  Director of Materials Research Centre Oleksiy Gogotsi presented a report about abrasive effect of  the coke particles flow on the steel
Director of Materials Research Centre Oleksiy Gogotsi At the PM 2012 Conference, NTUU KPI, Kiev, Ukraine
Final speech at the conference PM 2012, Dr. Leonid Chernyshev, Frantsevich Institute for Problems of Material Science
At the conference was presented report Regularities of Formation of High Pressure Phases of Carbon Under Shock Compression
At the conference was presented report Regularities of Formation of High Pressure Phases of Carbon Under Shock Compression
Dr. Zibrov I.I, Institute of High Pressure Physics, RAS,Troitsk

Dr. V.P. Filonenko,  Institute of High Pressure Physics, RAS,Troitsk

While developing a complex of equipment, ordered by American Energy Technologies Co, for the processing and receiving of graphitized and partially graphitized pure carbon materials, there was a problem to choose the thickness of details and parts of equipment. That equipment can be under the influence of the coke particles flow, moving at different speeds and acting with different pressures. Also there was a need to compare wear of ordinary structural steel 3 and stainless steel AISI 304.

Wear of steel parts is well simulated by abrasive wear test, that was done on the immovable ring type facility.

Read more about Testing of the material samples on the abrasive wear >>

The research group is grateful for project developing to US Department of Energy, DoE , Regina Carter, GIPP, US National Nuclear Security Administration, Ukrainian Science and Technology Centre (STCU), represented by Vic Korsun, STCU US Deputy Executive Director, and Irina Tomashevskaya.

 

 

News from MRC.ORG.UA

Drexel's MXene Filter Materials will be used for Wearable Artificial Kidney Technology

MXene pores“Our fundamental study of titanium carbide MXene supported by NSF showed that MXene is biocompatible, able of adsorbing a variety of small molecules, and holds a lot of promise in medical applications, so it is exciting to see it applied for improving and really changing dialysis — an area of need in health care that can help millions of people,” said Yury Gogotsi, PhD, Distinguished University and Bach professor in Drexel’s College of Engineering, who is a world leader in developing and studying MXenes.

 
MXene Coating Could Prevent Electromagnetic Interference in Wearable Devices

mxene-emi-fabricResearchers at Drexel University’s College of Engineering have reported that MXene coated fabric is highly effective for blocking electromagnetic waves and potentially harmful radiation. The discovery is a key development for efforts to weave technological capabilities into clothing and accessories. 

 
MRC and Drexel collaborative article on Scalable MXene synthesis is listed among the most accessed in Advanced Engineering Materials journal for the whole year

bulk MXene

This article is also Highly Cited in Web of Science (top 1% of all papers in the field).

 
H2020 MSCA RISE CanBioSe project activities - EsR/ER training and scientific seminar held in MRC, Kyiv, Ukraine, July 30-August 01, 2020

Canbiose project training and seminar

Training of early-staged researchers involved in CanBioSe research works on nanomaterials processing and scientific seminar on Advances in nanomaterials research for biomedical applications, were held with invited experts.

 
Scalable Production System for the Promising, 2D Nanomaterials MXenes

altFor one of the most promising new types of 2D nanomaterials, MXenes, that’s no longer a problem. Researchers at Drexel University and the Materials Research Center in Ukraine have designed a system that can be used to make large quantities of the material while preserving its unique properties

 
CANBIOSE project participant from MRC completed secondment visit to partner organization Vilnius University, Lithuania, on February-March 2020 due to CANBIOSE project

altCANBIOSE project participant from MRC performed secondment visit to project partner organization Vilnius University, Lithuania, on February 24 - March 14 2020.

 
H2020 MSCA RISE SALSETH project participant from MRC V. Balitskiy started secondment at University of Novi Sad, Serbia

altSALSETH project participant from MRC Vitalii Balitskiy was hosted by partners from University of Novi Sad (UNS), Serbia, during his secondment visit according to the project plan.

 
SALSETH Project Kick-off meeting was held in University of Novi Sad, Serbia, on february 28, 2020

altResearch team from Materials Research Centre (MRC), Kyiv, Ukraine, was represented by Vitalii Balitskiy, who made a presentation to project partners about the MRC company, its capabilities, current research projects and main activities.

 
The science of the future and the use of intelligent nanomaterials in advanced technologies. Lecture by Professor Yury Gogotsi for students, schoolchildren of Junior Academy of Sciences of Ukraine in Igor Sikorsky Kyiv Polytechnic Institute,Feb 24, 2020

alt

The science of the future and the use of smart nanomaterials in new technologies. Lecture by Professor Yury Gogotsi for students, and schoolchildren of the Junior Academy of Sciences of Ukraine in Sikorsky Kyiv Polytechnic Institute, February 27, 2020

 
Horizon 2020 NANO2DAY project participant A.Stepura from Polymer Institute of Slovak Academy of Science (Bratislava, Slovakia) was hosted by Materials Research Center (MRC), Kiev, Ukraine, on December 2019-February 2020

pisas--secondment-to-mrc-jan-2020_13.jpg - 86.27 KbAnastasiia Stepura from Polymer Institute Slovak Academy of Science (Bratislava, Slovakia) was hosted by Materials Research Centre  on December 2019- February 2020 during her secondment performing research works due to H2020 NANO2DAY project.

 
H2020 NANO2DAY project participants from MRC Veronika Zahorodna and Oleksiy Gogotsi visited partner organization Polymer Instityte SAS, Bratislava, Slovakia on January 2020

altResearchers from the Materials Research Center (MRC), Kiev, Ukraine,  Oleksiy Gogotsi and Veronika Zahorodna visited Horizon 2020 NANO2DAY project partner organization Polymer Institute of Slovak Academy of Science, Bratislava, Slovakia on January 2020. In cooperation with PISAS colleagues they were working on MXene doped polymer nanocomposites.

 
H2020 NANO2DAY project participant from MRC Ivan Hryshko was visiting project partner organization University of Latvia, Riga, on November-December 2019

altResearch engineer from MRC Ivan Hryshko is being visiting the University of Latvia, where he held a seminar on MXenes

 
Secondment of project participants from MRC O. Gogotsi and V. Zahorodna to project partners from LNEC under Horizon 2020 MSCA RISE Project №690968 NANOGUARD2AR, 12/11-11/12/2019, Lisboan, Portugal

altMRC Director O. Gogotsi and EsR Veronika Zahorodna in a secondment to LNEC, Lisboan, Portugal participated in a work meeting discussing project results and performing engineering research works due to H2020 MSCA RISE project No 690968 NANOGUARD2AR.

 
Horizon 2020 CANBIOSE project participants from Materials Research Center (MRC), Kiev, Ukraine visited partner organization Adam Mickiewicz University in Poznań, Poland, on October 27-November 27, 2019

altIn cooperation with AMU colleagues they were working on nanomaterials testing and characterization.

 
MXENE AT THE FRONTIER OF THE 2D MATERIALS WORLD BEILSTEIN NANOTECHNOLOGY SYMPOSIUM 2019, October 15–17, 2019, Favorite Parkhotel, Mainz, Germany

altThe symposium brought together leading international experts and those researchers who are just entering the exciting world of 2D carbides and nitrides to explore new synthesis methods, better understand properties and find new applications of MXenes.